Yamaha Command Link Single Engine 6Y8 Two Gauge Kit
$912.00
Current stock:
2
The Yamaha Command Link Single Engine 6Y8 Two Gauge Kit contains a pair of digital gauges: one multifunction tachometer and one multifunction speedometer. The displays are backlit and designed for optimum visibility and long-term durability.
The multifunction tachometer displays engine rpm, trim angle, oil level overheat warning, trip-specific hour meter and engine total operating hours.
The multifunction speedometer displays vessel speed, trip, time, fuel, low fuel warning (flashes on lowest bar), battery voltage (displays battery output and flashes if the output falls below 12 volts).
Yamaha Part #6Y8-0E83R-71-00. This kit contains the following parts:
| Qty | Part | Part Number |
| 1 | Tachometer Gauge | 6Y8-8350T-24-00 |
| 1 | Speedometer Gauge | 6Y8-83500-23-00 |
| 1 | Multi-Hub Assembly | 6Y8-81920-01-00 |
| 1 | In-Line Hub | 6Y8-81920-11-00 |
| 1 | Power Lead, 8 ft. | 6Y8-83553-02-00 |
| 1 | Cap, 4 pin | 6Y8-82582-11-00 |
| 1 | Module 1 Sensor (speed sensor) | 60V-8A4L1-1C-00 |
| 1 | Fuel Sender and GPS Lead Wire | 6Y8-8356N-01-00 |
| 1 | Pigtail Harness, Engine to Hub, 6 ft. | 6Y8-82521-31-00 |
| 1 | User Operation Guide | 6Y8-2819W-70-E0 |
Important Note: You will need to add two pigtail harnesses, one from the Tachometer to the Multi-Hub and one from the Speedometer to the Multi-Hub, to complete your installation. These are usually either two or three-foot pigtail harnesses, depending on the distance from your Multi-Hub to your gauges.
- Shipping:
- $0.00 (Fixed Shipping Cost)
